Product Search
Search results for 'D5856'
Showing 41 - 61 of 563 Total Results
(3) options
Location: Filter Flasks
Filter flasks from Test Mark feature a heavy wall filter flask with hose connection and silicone stopper.
CA-0700
Location: Chase Air
The Chase Air Indicator from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Plastic Beam Mold 6" x 6" x 21"
CA-0340
Location: Beam Mold, Plastic
Test Mark's durable, lightweight plastic beam mold uses simple thumbscrews for easy stripping, cleaning, and assembly.
CA-2170
Location: 30 Minute Timer
Plug aggregate equipment into the outlet at the back of the timer. Then plug timer cord into a wall outlet and turn the knob to the desired time. Time switch will turn off equipment automatically when time expires.
Marshall Automatic Double Compactor, 4" Rotating Mold
AA-0022
Location: Marshall Automatic Compactor
Automatically compacts two samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
SA-0112
Location: Asphalt
Mold Extractor is used with compression tester for removing 4" compaction mold specimens.
CA-2500
Location: Sample Splitters
The Test Mark mini sample splitter accurately divides dry materials, such as cement, powdered ores, coal, coke, sand, soils and other fine aggregates, so each half is representative of the original total sample.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
AA-2055
Location: Vacuum Extractor
Vacuum Extractor from Test Mark is used for quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.
CA-0356-P
Location: Concrete
Plastic base plate with convenient cut-out carrying handles and inscribed with concentric circles. Dimensions 36" x 36" x 1/2".
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
SA-0109-L
Location: CBR Accessories
LBR mold. 6" ID x 6" H with 2" detachable collar. Mold volume of 1/13.33 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder. LBR requires Spacer Disc, sold separately.
CA-2910
Location: Cube Molds
Tensile sand from Test Mark Industries is specially graded natural silica sand to pass a No. 20 (850 um) sieve.
(2) options
Location: Compaction Hammers
Soil Compaction Hammers from Test Mark are machined from steel and plated for rust resistance. Easy online ordering.
CA-4060-11
Location: Aggregate
Used to irrigate the test specimen with working calcium chloride solution to flush clay-size particles from the sand.
SA-0240
Location: Pocket Penetrometer
The Soil Pocket Penetrometer from Test Mark is used for the evaluation and classification of cohesive soils in terms of soil consistency.
Aqua-Check Kit, 20 gram capacity
SA-0255
Location: Moisture Testing
The Aqua-Check from Test Mark is a portable system used for measuring the moisture content of a wide range of materials including sand, aggregates and soil.
CA-4060
Location: Sand Equivalent
Test Mark carries sand equivalent test sets as part of a complete line of aggregate testing products.
(4) options
Location: Manual Compression Testing Machines
Testing range of 5,000 to 500,000 lbs. (22.2 – 2,224 kN) with an accuracy of ±.5% of indicated load., Frame stiffness rating of 41.6 million lbs/in., Easier specimen loading with large platen table. . Request a Quote Our CM-5000 series machines feature rigid distortion-resistant load frames...
CA-2570
Location: LA Abrasion
The LA Abrasion Machine from Test Mark tests crushed rocks, slag and gravel for resistance to abrasion.